Euler knikformule Euler buckling formula $P = \frac{\pi^2\cdot E\cdot I}{(K\cdot L)^2}$ op een K&E Polyphase on an K&E Polyphase
Klik op de eerstvolgende onvoltooide stap Click the first incomplete step maar raak de rekenliniaal niet aan. but don't touch the slide rule.
Voer $E$, $I$, $L$ en $K$ in:
Enter $E$, $I$, $L$ and $K$:
Schuif de index van B naar $E$ op A.
Move B index to $E$ on A.
Uit voorzorg op $10\cdot E$ gezet! Set to $10\cdot E$ as a precaution!
Uit voorzorg op $10\cdot E$ gezet! Set to $10\cdot E$ as a precaution!
Sleep loper naar $I$ op B. $E\cdot I$ staat nu onder de loper op A.
Move cursor to $I$ on B. $E\cdot I$ is under the cursor on A.
Zet $K$ op C onder de loper. De index van C staat nu tegenover
Move $K$ on C under the cursor. The C index is now opposite
$\frac{E\cdot I}{K^2}$
op A.
on A.
Sleep loper naar $L$ op CI.
Move cursor to $L$ on CI.
$10\cdot L$
om op de schaal te blijven!
to stay on the scale!
Hierdoor staat de loper bij This places the cursor at $\frac{E\cdot I}{(K\cdot L)^2}$ op A. on A.
Hierdoor staat de loper bij This places the cursor at $\frac{E\cdot I}{(K\cdot L)^2}$ op A. on A.
Dit kan vermenigvuldigd worden met $\pi^2 = 9,87$,
door de index B naar de loper te schuiven,
de loper over 9,87 op B te zetten en het resultaat op A af te lezen.
Maar $\pi^2$ ligt zo dicht bij 10 dat dit vaak niet nodig is.
This can be multiplied by $\pi^2 = 9.87$,
by moving the B index to the cursor,
then moving the cursor over 9.87 on B and reading the result under the cursor on A.
But $\pi^2$ is so close to 10 that this may not be necessary.